CETOL HLS
   

Transparent, satin, low-build woodstain based on oil-alkyd resins for exterior use.

     
    Resistant to UV light, surface mould/algae, peeling and cracking.

Micro-porous, allows timber to breathe.

Wood grain remains visible.  

Excellent penetration and adhesion.  

Water repellent. 

Abrasion resistant.

     
  Use: To decorate and protect all timber constructions: joinery, cladding, doors and window frames. The viscosity of Cetol HLS ensures deep penetration into the timber making it highly suitable for porous timber species such as Western Red Cedar, Oregon, Treated Radiata Pine etc.
     
    On softwood or hardwood:
As a primer coat to Supernatural, Cetol Deck, Cetol Filter 7 or Cetol TGL+
     
    DECKS AND OUTDOOR FURNITURE
    Use CETOL HLS only as a standalone 3 coat system for an abrasion resistant finish.
     
  Can Sizes: 1 litre, 5 litre, 20* litre (*Selected colours)
     
  Coverage: Smooth, 14-18m2 /litre 
Rough, 6-9m2/litre
     
  CLEAN BRUSHES IN TURPS
     
     
     
 


For full application and technical information contact:
Tenaru Timber & Finishes Pty Ltd
P O Box 768 Darlinghurst NSW 1300 Australia
Tel:  61 2 9360-4500  Fax: 61 2 9360-1924
E-mail: sales@tenaru.com.au

All recommendations and instructions are made in good faith without accepting liability because conditions of use will be beyond our control.